Friday, January 20, 2012

Doubling

Doubling is often confused with slur as both exhibit an elongation of halftone dots. However, slur is usually an elongation in the direction of sheet travel through the press while doubling can be in any direction. Doubling (and slur) often manifest as a problem with the range of tones available in the presswork being compressed and loss of detail, particularly in the shadow areas (a.k.a. muddy halftones). Doubling can be caused by many of the same factors as slur. When the cylinders rotate the halftone dots are not placed in exactly the same position with every revolution. As a result the dots print up as double or multiple images. Doubling between units occurs when a blanket picks up a previously printed ink film. This is known as backtrapping. Examine the dots, or line art graphics, under a loupe to confirm whether the problem is doubling or slur.

No comments:

Post a Comment